The pursuit of classic beauty and luxury is found within Marble Obsession™. This well-rounded series offers versatility through a mix of different shapes, sizes, and finishes—everything you need to create breathtaking spaces.
-
Additional Colors
-
Application
Target Dcof Wet Suitable Dry & Level - Interior Floor N/A ✔ Wet & Level - Interior Floor ≥0.42 ✔ Shower Floors (Residential or Light Commercial) ≥0.42 ✔ Exterior Floor Applications (including pool decking & other wet areas with minimal footwear) ≥0.60 Ramps & Inclines ≥0.65 Walls/Backsplashes N/A ✔ Countertops N/A ✔ Pool Linings N/A ✔ 1/8" ● Manufacturer Advisory: All tile is measured by the DCOF AcuTestTM method. Tiles with DCOF values less than 0.42 are not recommended for use in areas with wet or slippery conditions. For more information, see ANSI standard A137.1 section 6.2.2.1.10, available at www.tileusa.com.
● A DCOF value of greater than or equal to 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-A326.3. For more information about DCOF and the DCOF AcuTest™, visit daltile.com/DCOF.
● A DCOF value of =0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-A326.3. For more information about DCOF and the DCOF AcuTestTM, visit marazzitile.com/DCOF.
● Suitable for exterior applications in freezing and non-freezing climates, when proper installation methods are followed.
-
Durability Chart
Floor Surface Wear Resistance 1 - Residential Bathrooms 2 - All Residential Areas 3 - All Residential / Light Commercial 4 - All Residential / Commercial -
Technical Specifications
Test Method Mosaic Tile Floor Tile Wall Tile Water Absorption ASTM C373 < 3.0 < 0.5 < 20.0 Breaking Strength ASTM C648 > 250 lbs > 275 lbs 120-230 lbs Scratch Hardness ASTM MOHS 8 6 4.0-6.0 Chemical Resistance ASTM C650 Resistant Resistant Resistant
Available Trim (3)
You May Also Like
